横向磁场激励下铁磁梁式板的混沌运动分析

在磁体力分布的磁弹性理论模型和磁场准静态假定模式基础上，对于处在周期时变磁场 中的不可移简支铁磁梁式板非线性磁弹性动力特性进行定性与定量分析．首先利用磁场的摄 动技术和结构变形的模态法，导出了关于模态坐标的非线性动力方程；然后利用Ｍｅｌｎｉｋｏｖ方 法，从理论上给出这一磁弹性动力系统可能出现混沌运动的必要条件及参数范围；最后采用变 步长Ｒｕｎｇｅ－Ｋｕｔｔａ数值积分方法对其磁弹性相互作用的混沌现象进行了定量搜索与模拟，并 利用其轨迹的Ｐｏｉｎｃａｒｅ截面图与Ｌｉａｐｕｎｏｖ指数加以判断．结果表明磁弹性简支梁式板在横 向周期时变磁场中存在混沌吸引子，且在机械阻尼很小时其混沌吸引子表现出稠的特性．     

Can People Predict Chaotic Sequences?

Previous studies suggesting that people predict chaotic sequences better than chance have not discriminated between sensitivity to nonlinear determinism and facilitation using autocorrelation. Since prediction accuracy declines with increases in the look-ahead window in both cases, a decline in prediction accuracy does not imply chaos sensitivity. To overcome this problem, phase-randomized surrogate time series are used as a control. Such series have the same linear properties as the original chaotic sequence but contain no nonlinear determinism, i.e. chaos. In the experimental task, using a chaotic Hénon attractor, participants viewed the previous eight days temperatures and then predicted temperatures for the next four days, over 120 trials. The control group experienced a sample from a corresponding phase-randomized surrogate series. Both time series were linearly transformed to provide a realistic temperature range. A transformation of the correlation between observed and predicted values decreased over days for the chaotic time series, but remained constant and high for the surrogate series. The interaction between the days and series factors was statistically significant, suggesting that people are sensitive to chaos, even when the autocorrelation functions and power spectra of the control and experimental series are identical. Implications for the psychological assessment of individual differences in human prediction are discussed.     

考虑几何与材料及静风荷载的非线性因素的大跨径桥梁静风稳定分析法

针对现有的桥梁静风稳定分析方法中存在的问题，提出了增量与内外两重迭代相结合的新方法，并且考虑了结构几何、材料和静风荷载非线性。在上述方法的基础上，编制了桥梁非线性空气静力稳定分析程序BNAP，并进行了相应的算例分析，所得结果表明该方法具有计算稳定和速度快的优点。最后，以一座主跨1000米的斜拉桥为例，分析了结构几何非线性、材料非线性和静风荷载非线性对大跨径桥梁空气静力稳定性的影响。     

Dissipative Waves in a Relaxing Gas Exhibiting Mixed Nonlinearity

We consider a weakly dissipative quasilinear system of PDEs, governingthe unsteady one-dimensional motion of a relaxing gas, and investigatethe effects ofhigher order terms and the source term, present in the differentialsystem, on the wave motion associated with it. The undisturbed stateof the medium, which is assumed to be uniform and at restadmits mixed nonlinearity, i.e., the quadratic nonlinearity parameter inherent in the system changes sign depending on the basestate. The method of multiple scales is employed to determine theevolution equation governing small perturbations to the state where is of O(), and the effects of nonlinearity arenoticeable over times of order O(^–2).     

识别求解路径上奇异点的一个计算方法

提出一个在路径跟踪计算中识别分支点和极值点的实用方法，给出了算例。     

论“岩体结构控制论”

经过长期实践和研究,作者于1984年提出岩体结构控制论是岩体力学的基础理论,并全面、系统地以岩体结构控制论为指导研究了岩体变形、岩体破坏及岩体力学性质的基本规律;提出岩体变形系山岩体材料变彤和岩体结构变形共同贡献的,岩体破坏系受岩体材料破坏和岩体结构破坏控制的;岩体力学性质不仅决定于岩体材料力学的性质,而且受控于岩体结构力学效应及环境因素力学效应。在此基础上,作者提出了岩体可以划分为连续介质、碎裂介质,块裂介质及板裂介质四种岩体力学介质,从而建立了完整的岩体结构力学理论体系。     

半刚性钢框架的内力分析

采用二阶非线性分析方法分析和设计半刚性钢框架，包括连接的柔性以及构件的几何非线性的影响，提出了半刚性钢框架中梁柱单元刚度矩阵和半刚性梁的单元刚度矩阵；推导了半刚性梁在集中荷载，均布荷载，线性荷载作用下的固端弯矩的求解公式；连接的柔性对无支撑框架的侧移有很大的影响，设计时通过变化连接的刚度以平衡梁的跨中和端弯矩。     

Determination of mechanical properties by instrumented indentation

The paper reviews the current state of the depth-sensing indentation (sometimes called nanoindentation), where the information on material behaviour and properties is obtained from the indenter load and depth, measured continuously during loading and unloading. It is shown how the contact parameters and principal characteristics are determined using pointed or spherical indenters. Indentation tests can be used for the measurement of hardness and elastic modulus, and also of the yield stress and for the construction of stress–strain diagrams, for the determination of the work of indentation and its components. Most devices use monotonic loading and unloading, but some also enable measurement under a small harmonic signal added to the basic monotonously increasing load. This makes possible continuous measurement of contact stiffness and the study of dynamic properties and the determination of properties of coatings. One section is devoted to the measurement on viscoelastic-plastic materials, where the delayed deforming must be considered during the measurement as well as in data evaluation. Instrumented indentation can also be used for the study of creep under high temperatures. The paper also discusses the errors arising in depth-sensing measurements and informs briefly about some other possibilities of the method.     

On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure

Mother-of-pearl, also known as nacre, is the iridescent material which forms the inner layer of seashells from gastropods and bivalves. It is mostly made of microscopic ceramic tablets densely packed and bonded together by a thin layer of biopolymer. The hierarchical microstructure of this biological material is the result of millions of years of evolution, and it is so well organized that its strength and toughness are far superior to the ceramic it is made of. In this work the structure of nacre is described over several length scales. The tablets were found to have wavy surfaces, which were observed and quantified using various experimental techniques. Tensile and shear tests performed on small samples revealed that nacre can withstand relatively large inelastic strains and exhibits strain hardening. In this article we argue that the inelastic mechanism responsible for this behavior is sliding of the tablets on one another accompanied by transverse expansion in the direction perpendicular to the tablet planes. Three dimensional representative volume elements, based on the identified nacre microstructure and incorporating cohesive elements with a constitutive response consistent with the interface material and nanoscale features were numerically analyzed. The simulations revealed that even in the absence of nanoscale hardening mechanism at the interfaces, the microscale waviness of the tablets could generate strain hardening, thereby spreading the inelastic deformation and suppressing damage localization leading to material instability. The formation of large regions of inelastic deformations around cracks and defects in nacre are believed to be an important contribution to its toughness. In addition, it was shown that the tablet junctions (vertical junctions between tablets) strengthen the microstructure but do not contribute to the overall material hardening. Statistical variations within the microstructure were found to be beneficial to hardening and to the overall mechanical stability of nacre. These results provide new insights into the microstructural features that make nacre tough and damage tolerant. Based on these findings, some design guidelines for composites mimicking nacre are proposed.     

山东龙口北皂煤矿软岩力学特性实验研究

根据室内实验结果, 本文讨论了北皂煤矿的岩石力学性质, 物化特性。泥质岩类的力学性质和水理性质、物化特性有关。泥质岩类具有显著的流动变形和各向异性。